Rytons A1 Fire-rated Metal Rytweep

Cavity weep hole ducts are a pre-formed component long established as an effective method of allowing the cavity to drain freely without obstruction. Quick and easy to position as work proceeds and virtually invisible within the mortar joint so not to detract from the appearance of the brickwork.

The tapered design restricts the entry of wind-driven rain to prevent staining, meeting NHBC Standards and maintaining the aesthetic appearance of the building.

  • Considered fire class A1 without testing, as per European Commission paper 96/603/EC referred to in BS EN 13501-1:2018.
  • Suitable for use in high-rise buildings with a storey 18m or more above ground level to Regulation 7(2) and Building Regulations Approved Document B.
  • Suitable for use in buildings with a storey 11m or more above ground level to Building (Scotland) technical handbook 2019: domestic and non-domestic, 2.7.
  • Classification: A1.  Definition: Non-combustible.  Description: No contribution to fire.

UK Patent Pending GB1916157.9.

Registered Design 6078064.

Product code : 83RRYTWEA1METAL

(Box)

Key Performance Criteria

  • Product Type : Cavity weep
  • Euroclass Fire Classification : A1
  • Dimensions

    Width : 10mm

    Length : 101mm

    Height : 66mm

    Style

    Material : Zinc

    Unit & Pack Information

    Unit Type : Box

    Unit Pack Quantity : 50

Associated products

Installation of Rytons A1® Fire-rated Metal Rytweep®

Installation is fast and easy as work proceeds with the Rytweep® replacing a vertical mortar joint. Ensure the tapered end with the circular outlet is facing the outside and is flush with the external face.  Position the bottom of the Rytweep® on the mortar bed against the brick/block. Position the next brick alongside the installed Rytweep® and mortar in until only the small weep outlet is visible (ensuring the outlet does not become blocked). Space every fourth brick to drain cavities above and below the damp proof course, and above lintels and cavity trays. At least two weep holes should be provided over an opening, i.e. lintel.