Share this page
Galvanised lightweight steel section for use in non-load bearing Knauf partition systems.
Product code : 53WMCA
Knauf Airless Finish is a highly efficient spray applied alternative to traditional plaster for finishing walls and ceilings.
Product code : 53WDRMAIF
Knauf Angle Sections are galvanised mid steel angles for use with partitions, column and beam encasements and suspended ceilings.
Product code : 53WNAS
Pre-mixed synthetic dispersion for priming Knauf AQUAPANEL® Cement Board Indoor after jointing and filling.
Product code : 53WQIP
Cement-bound material for skim coating.
Product code : 53WQJFs
Corrosion-protected screws for fixing Knauf AQUAPANEL® to light gauge steel profiles.
Product code : 53WQMS
Glass fibre tape with an alkaline-resistant coating used to reinforce joints.
Product code : 53WQTP
A tough, impact-resistant glass-fibre reinforced cement tile backer board for use in wet and humid areas.
Product code : 53SAPIN
A lightweight cement board suitable for interior ceilings in wet/humid areas and some exterior soffits.
Product code : 53SAPSL
Cement-based material for filling joints.
Product code : 53WQJFG
Knauf Baseboard is a handy sized plasterboard suitable for use on ceilings where a plaster finish is required.
Product code : 53SB
A polymer-based product designed to provide a mechanical key to backgrounds which are smooth or have limited suction.
Product code : 53WKBK
Galvanised lightweight steel section for use in Knauf wall lining systems and Knauf C-Form Ceiling Systems.
Product code : 53WWCC
Metal connector, used to join two sections of Knauf C Channel in Knauf C-Form Ceiling_Systems
Product code : 53WWCCC
Knauf C Studs are a galvanised lightweight steel section for use in non-load bearing Knauf partition systems.
Product code : 53WMCS
The Knauf Channel Intersection Connector locates primary and secondary channels.
Product code : 53WWCIC
Self-tapping black phosphate screws with countersunk Ph2 heads for fixing plasterboards to metal and timber framing.
Product code : 53WFCS
Designed to fix Knauf Performance Plus directly to metal and timber structures.
Product code : 53WFPPC
Knauf Core Board is a purpose designed plasterboard for use in conjunction with the Knauf Shaft Wall system.
Product code : 53SC
Used to provide fixing for horizontal Knauf Core Board joins to ensure fire protection of the Knauf Shaft Wall system
Product code : 53W
A multi-purpose self adhesive tape, used to reinforce joints and is suitable for plasterboard patch repairs.
Product code : 53WACFT
Decorative plaster moulding with a paper face for direct application of paint finishes.
Product code : 53WCOV
Gypsum-based adhesive to affix Knauf Cove.
Product code : 53WCCA
The Knauf CT Stud is a unique galvanised steel section used in the Knauf Shaftwall System.
Product code : 53WL
Installed with a unique paper tape and nose coating that resists scuffing and fuzzing from knives and sanding.
Product code : 53WRCBB1EB3
A galvanised steel section for use as an optional head track where increased deflection is expected.
Product code : 53WEUD
Used at the deflection head detail of drywall partition systems to provide an effective fire and acoustic barrier.
Product code : 53WODHFS
Pre-formed galvanised steel beads that provide protection to external corners of drywall partitions.
Product code : 53WADAB
Used to provide protection for exposed plasterboard edges, suitable for 12.5mm thick plasterboard.
Product code : 53WADEB
An aluminium section used to bridge gaps left for expansion and contraction in drywall partitions.
Product code : 53WAMC
Self-drilling black phosphate screws with countersunk Ph2 heads for fixing plasterboards to metal and timber framing.
Product code : 53WFDSJ
Product code : 53WFDSS
Self-tapping black phosphate coarse threaded wood screws with countersunk Ph2 heads for fixing plasterboard to timber frames.
Product code : 53WFSW
Ready mixed lightweight patching plaster for small and large repairs including cracks in walls and ceilings.
Product code : 53WDRMEP
Knauf Fibre Tape is a multi-purpose self adhesive tape used to reinforce joints and to patch repairs to plasterboard.
Product code : 53WBBF
A fast-setting multi-purpose gypsum-based compound for bedding tapes and beads, as well as finishing. For hand application.
Product code : 53WBFFP3
Product code : 53WBFFP6
An easy-to-sand jointing compound for bedding tapes and finishing joints in drywall partitions and ceilings.
Product code : 53WRFF
A ready-mixed jointing compound for bedding tapes and finishing joints in drywall partitions and ceilings.
Product code : 53WRFFL
Knauf Fire Panel is a fire resistant plasterboard suitable for use as a cladding component in partitions and lining systems.
Product code : 53SF
Offers additional rigidity over the flat fixing plate, for use with partitions and wall linings.
Product code : 53WNFC
Knauf Fixing Clips offer a secure connection of channel sections.
Product code : 53WNFX
Used as part of a deflection head as well as to improve rigidity or for the horizontal board joints where required.
Product code : 53WNFF
A Flexible Metal Tape for varying angles.
Product code : 53WRFMT
Galvanised lightweight steel sections for use in non-load-bearing Knauf partition and wall lining systems.
Product code : 53WG
Ready-mixed water-resistant skim coat for use over Knauf AQUAPANEL® Interior and Knauf AQUAPANEL® Ceiling systems.
Product code : 53WQISK
A rapid curing, water based acrylic expanding fire resistant mastic used for linear joint sealing.
Product code : 53WAFB
Used as head and floor track and perimeter framing section of the Knauf Shaft wall system.
Product code : 53WJ
Knauf Joint Cement Premium is for finishing joints by hand, giving an exceptional finish that requires minimal sanding.
Product code : 53WBAJCP
A fast-setting gypsum compound for bedding joints by hand application.
Product code : 53WBAJFP
A white tape for reinforcing joints, creating the strongest joints, especially ideal on ceilings.
Product code : 53WBAJT
Knauf Moisture Panel offers an improved moisture resistance, suitable for use in kitchens, bathrooms and toilets.
Product code : 53SM
The board is an all round performer, ideally suited to schools, hospitals and other large commercial projects.
Product code : 53SU
Product code : 53WFPP
Knauf Plank is used as a key component in many partition and floor systems where it acts as an acoustic mass layer.
Product code : 53SP
A multi-purpose gypsum-based adhesive used with Knauf Metal Furring Channel, plasterboards and insulating laminates.
Product code : 53WABC
ProRoll Light is a ready mixed roller applied plaster used as a superior finish onto plasterboard backgrounds
Product code : 53WDPRL
ProRoll Max is a ready mixed roller applied plaster used as a superior finish onto plasterboard backgrounds
Product code : 53WDPRM
A resilient metal section which is fixed to floors and partitions to reduce direct sound transmission.
Product code : 53WNRB
Offers enhanced levels of sound performance and a greater density, ideal for applications that require 10kg/m2 density.
Product code : 53SH
Suitable for use as a cladding component in partitions and lining systems. The boards also offer enhanced acoustic performance
Product code : 53SS
Knauf Staggered Stud Clips are used to locate Knauf I studs in the Knauf Silent Spacesaver Partition Systems.
Product code : 53WGS
A galvanised steel section for use as the standard head and floor track, suitable for use in Knauf partitions and wall linings.
Product code : 53WEUC
Locates Knauf C Channel to the background support, for use in Knauf Wall Liner and C Form ceiling systems.
Product code : 53WWUB
The boards feature a metallised polyester foil laminate on the grey paper face, creating an effective vapour barrier.
Product code : 53SV
Zinc-coated self-drilling low profile screws with Ph2 heads for metal-to-metal fixing.
Product code : 53WFWHJ
Black phosphate low profile screws with Ph2 head for metal to metal fixing.
Product code : 53WFWHS
Wallboard is a standard plasterboard, ideal for use as a cladding component in a majority of partitions and lining systems.
Product code : 53SW
Wallboard Primer is a surface treatment for plasterboard joints to ensure a professional finish.
Product code : 53WAWP
Offers good thermal performance and is ideal for use in refurbishment and new build applications.
Product code : 49N
Accessing our website tells us you are happy to receive all our cookies. However you can change your cookie settings at any time. Find out more.
Nationwide Delivery
