Share this page
For securing wall studs at floor and ceiling junctions.
Product code : 53KD
A general purpose gypsum based adhesive for dab fixing Gyproc plasterboards
Product code : 53JCDW
Corrosion resistant self-tapping steel screws for fixing board to metal framing less than 0.8mm thick.
Product code : 53JESDW
Securing wall studs at floor and ceiling junctions for partitions up to 8000mm high.
Product code : 53KE
Product code : 53KCA
Suitable for cross-bracing on twin frame wall systems and fixing of medium to heavyweight fittings.
Product code : 53KJG
Non-combustible glass-reinforced gypsum plasterboard giving up to 120 minutes fire protection.
Product code : 53HA
Corrosion resistant self-tapping steel screws with unique head design that countersinks itself into Glasroc F FIRECASE plasterboard to plasterboard and plasterboard to metal framing.
Product code : 53HC
Non-combustible glass-reinforced gypsum plasterboard.
Product code : 53HM
Non-combustible glass-reinforced gypsum plasterboard with a water resistant pre-primed acrylic coating to receive tiling.
Product code : 53HT
Unique shaped studs used for increased acoustic performance in wall framing.
Product code : 53KA
Widely used in framed construction to provide support, protection, fixing and additional strength to framing.
Product code : 53KH
Vertical supports for Gypframe wall framing systems.
Product code : 53KB
Vertical support designed for stronger partition systems, allowing for increased partition height.
Product code : 53KI
Gypsum plasterboard with fire and moisture resistant additives used to protect shafts and ducts.
Product code : 53GC
Paper joint tape for a perfect straight edge
Product code : 53JBCT
Gypsum plasterboard moulding in classic S profile.
Product code : 53JACN
Gypsum plasterboard moulding in traditional C profile
Product code : 53JACV
Gypsum plasterboard with fire and moisture resistant additives for enhanced sound insulation and impact resistance performance.
Product code : 53GDT
Gyproc EasiFill 20 gives a fast finish for small holes.
Product code : 53JBEF20
Gyproc EasiFill 60 for the repair of small holes.
Product code : 53JBEF60
Gypsum plasterboard with fire resistant additives with pink paper lining for easy recognition.
Product code : 53GFS
Gypsum plasterboard with fire resistant additives, backed with a vapour control layer.
Product code : 53GFV
Gypsum plasterboard with fire and moisture resistant additives.
Product code : 53GFM
12.5mm Gyproc Habito plasterboard features an engineered core which provides enhanced levels of strength, durability and fixability.
Product code : 53GL
Gypsum plasterboard in small easy-to-handle sizes.
Product code : 53GH
A gypsum based setting material for bulk and secondary filling of plasterboard joints designed to be used in conjunction with Gyproc Joint Cement.
Product code : 53JBJF
A paper tape designed for reinforcement of flat joints or internal angles.
Product code : 53JBJT
70mm wide corner tape which is easy to handle and install, with a high-strength, tapered co-polymer core.
Product code : 53JBL
Gypsum plasterboard with moisture resistant additives in the core and special green lining paper for easy recognition.
Product code : 53GM
Standard Gypsum plasterboard located as an inner layer.
Product code : 53GP
An easy to sand air-drying powdered jointing material. For the finishing stage over Gyproc Joint Filler.
Product code : 53JBJC
Used for forming a seal to minimise any potential air gaps in BG systems to maintain optimum acoustic performance.
Product code : 53JCSC
Gypsum plasterboard with a high density core for enhanced sound insulation performance.
Product code : 53GST
Gypsum plasterboard with fire resistant additives and a high density core for enhanced sound insulation performance.
Product code : 53GSF
Gypsum plasterboard with moisture resistant additives and a high density core for enhanced sound insulation performance.
Product code : 53GSM
Gypsum plasterboard bonded to an expanded polystyrene foam insulate for a basic level of thermal insulation.
Product code : 48W
Gypsum plasterboard with integral vapour control layers for an advanced level of thermal insulation.
Product code : 50O
Gypsum plasterboard bonded to an extruded polystyrene foam insulant providing a vapour control layer for thermal insulation.
Product code : 49H
Gypsum plasterboard bonded to a phenolic foam insulant and integral vapour control layer for enhanced thermal insulation.
Product code : 51S
Cost effective plasterboard for standard drylining performance.
Product code : 53GW
Standard gypsum plasterboard, backed with a vapour control layer.
Product code : 53GVS
Gypsum plasterboard for specific sound insulation performance, used within the residential sector.
Product code : 53GTT
Corrosion resistant self-tapping steel screws for fixing plasterboard to metal framing 0.8mm thick and greater.
Product code : 53JESJP
Secondary mechanical fixing for Gyproc laminates in the DriLyner TL, SI and RF systems on masonry walls.
Product code : 53JEP
A ready-mixed jointing product, which is lightweight and has low shrinkage. Compatible with the majority of airless spraying material.
Product code : 53JBPM
Acoustically engineered channel to separate board fixing from the primary frame.
Product code : 53KPR
Gypsum fibre plasterboard with additives for rigidity, durability and mechanical strength.
Product code : 53HR
High performance impact resistant gypsum fibre board for use in the GypWall EXTREME system.
Product code : 53HRA
Corrosion resistant self-tapping steel screws designed for fixing Rigidur H board to framing.
Product code : 53HRS
For fixing floorboards through Gyproc Plank into the Gypframe Floor Channel flange.
Product code : 53KQ
A finish coat plaster for use on plasterboards.
Product code : 53JQBF
A shorter set repair and patching product providing a quicker solution for repairing walls.
Product code : 53JPB60
A versatile undercoat plaster that can be used on a variety of backgrounds.
Product code : 53JPBC
Bonding agent for smooth and/or low suction backgrounds.
Product code : 53JUTB
A cement-based undercoat plaster for re-plastering after the installation of a damp-proof course.
Product code : 53JPDC
A versatile skim finish plaster in a smaller bag size.
Product code : 53JQFP
A suction control primer to give a lower suction base on very dry backgrounds.
Product code : 53JUGYP
Undercoat plaster with high impact resistance.
Product code : 53JPHW
A versatile skim finish plaster.
Product code : 53JQMF
An undercoat and finish plaster in one in a smaller bag size.
Product code : 53JPOCP
Galvanised steel angle bead with expanded wings used to reinforce external angles.
Product code : 53JSAB
Galvanised steel bead with expanded wings. For finishing and reinforcing plaster edges.
Product code : 53JSSB
Self-adhesive glass fibre mesh tape.
Product code : 53JVF
A finish plaster that can be spray applied.
Product code : 53JQSF
Galvanised steel bead with perforated 30mm wings for finishing and reinforcing edges of 2mm plaster finishes.
Product code : 53JTAB
Galvanised steel bead with perforated wings for finishing and reinforcing edges of thin coats of plaster.
Product code : 53JTSB
A versatile undercoat plaster that can be used on a variety of backgrounds, in a smaller bag size.
Product code : 53JPUCP
An undercoat and finish plaster in one.
Product code : 53JROC
60% tougher than standard plaster.
Product code : 53JQDF
A unique plaster that attracts magnets.
Product code : 53JQMP
A skim finish plaster that improves indoor air quality.
Product code : 53JQPF
Product code : 53JESJPW
Accessing our website tells us you are happy to receive all our cookies. However you can change your cookie settings at any time. Find out more.