Share this page
A smooth and highly durable cement particle board for use in load bearing applications.
Product code : 53AXS
Provides protection for external corners and board edges when used in conjunction with Siniat GTEC jointing compounds.
Product code : 53BGTPEX
A unique shaped C Stud which can give increased acoustic performance over standard C Studs with the same board linings.
Product code : 53CDAS
Spring steel acoustic brace.
Product code : 53CJVB
Product code : 53CJVB90
For use in areas exposed to humidity where high performance is expected.
Product code : 53AAT
Specifically formulated for use with GTEC Aqua Board and GTEC Aqua Strip as a complete tilebacking solution.
Product code : 53BCAQ
Used in conjunction with GTEC Aqua Board and GTEC Aquamix to provide a complete tilebacker solution.
Product code : 53BCAQR
A lightweight 4ft long plasterboard used as a base for skim finishing.
Product code : 53ABS
C shaped metal section used with GTEC U Track to provide framework for wall linings and partitions.
Product code : 53CACS
GTEC CH Stud is a non-loadbearing section utilised as part of GTEC Shaftwall Systems.
Product code : 53CECH
A strong, lightweight and flexible board for creating curved walls and ceilings.
Product code : 53ACT
A gypsum plaster moulding manufactured in a larger traditional cove profile.
Product code : 53BBCO120
A gypsum plaster moulding manufactured in a traditional cove profile.
Product code : 53BBCO090
Formulated to provide good adhesion when used with GTEC Cove 90 and GTEC Cove 120.
Product code : 53BBCA
A dense plasterboard for use in areas where sound insulation is critical.
Product code : 53AST
GTEC Drywall High Thread screws for attaching plasterboard to timber framework.
Product code : 53BFGHT
For use with the Siniat GTEC Performance Boards and thin gauge metal studwork (under 0.7mm thick).
Product code : 53BFLDST
Seals joints and plasterboard faces.
Product code : 53BCSE
GTEC Drywall Self Drilling screws for attaching plasterboard to thick gauge GTEC metal.
Product code : 53BFHSD
GTEC Drywall Self Tapping Screw for attaching plasterboard to thin gauge GTEC metal.
Product code : 53BFDST
Protects external corners, angles and panel intersections in drywall construction.
Product code : 53BGDUO
Product code : 53AET
Steel sections used for starter studs, intersections, door openings and end studs as part of the GTEC Shaftwall Systems.
Product code : 53CFES
Product code : 53BGEB125
A general purpose drylining board laminate with thermal insulation.
Product code : 48S
For use in areas where high technical performance is required.
Product code : 53AF
A fire resistant, high strength board.
Product code : 53ADS
For use in areas where high technical performance is required and there is moisture present.
Product code : 53AGT
Gypsum fire board with an additional laminated vapour control layer.
Product code : 53AKT
GTEC Fixing Channel is a galvanised metal channel used in linings and partitions.
Product code : 53CHM
GTEC Flat Strap is a galvanised metal used in linings and partitions.
Product code : 53CJFS
Flexible Metal Tape-On Corner ensures straight, strong corners at any angle.
Product code : 53BCTF
GTEC Flex track is designed to allow easy construction of curved partitions.
Product code : 53CGDF
GTEC Heavy Gauge Primary Channel is a steel channel used to form heavy duty suspended ceiling grids.
Product code : 53CGUDT052Y
GTEC I Stud is an I shaped section used for vertical frame elements within a GTEC system.
Product code : 53CCIS
A galvanised metal strip used in a variety of systems to help with the installation of mineral wool insulation quilt.
Product code : 53CJIN
Seals joints and service penetrations within walls, partitions, fire rated door frames and glazing systems.
Product code : 53CKAC
GTEC J Track is a J shaped steel track utilised as part of the GTEC Shaftwall System.
Product code : 53CGJT
Strong, cross-fibre tapes for use with our joint compounds to reinforce joints and corners.
Product code : 53BCTJ
Stronger and harder than standard plasterboard giving greater impact and pull out resistance.
Product code : 53ALD
A dense plasterboard for use in areas where high technical performance is required.
Product code : 53AJT
Galvanised versatile metal section used in a number of systems.
Product code : 53CJMF
For use in moist areas where standard plasterboards are not suitable.
Product code : 53AMT
Flexible metal profile used to create movement joint.
Product code : 53CJMC
GTEC nailable plugs for the secondary mechanical fixing of GTEC Thermal Boards.
Product code : 53BFNP
Self Adhesive fibreglass plasterboard jointing and repair tape.
Product code : 53BCTP
For use as a general drylining board and in acoustic floor systems.
Product code : 53AP
An innovative acoustic stud aimed at helping achieve acoustic performances on site.
Product code : 53CDRA
GTEC Resilient Bar is a galvanised acoustic isolation bar used in multiple systems.
Product code : 53CHRBD
GTEC Resilient Tape Self-adhesive acoustic isolation tape.
Product code : 53CJRA
A general drylining board.
Product code : 53AW
A drylining board laminate with significantly improved thermal insulation, better fire safety and vapour resistance.
Product code : 51L
Used to provide high levels of improvement to thermal insulation in wall lining and roof applications.
Product code : 50N
A superior drylining board laminate with enhanced thermal insulation.
Product code : 49J
GTEC U Track is a U shaped section used with GTEC C Studs to provide framework for wall linings and partitions.
Product code : 53CGUT
GTEC U Track Deep Flange is a B gauge U shaped section used for partitions with heights exceeding 4.2m.
Product code : 53CGUDT
GTEC U Track Extra Deep Flange is a W gauge U shaped section used for partitions with heights exceeding 4.2m.
Product code : 53CGUXT
Product code : 53AQT
Gypsum based compound for direct bonding plasterboard to walls or bonding GTEC Metal Furring Wall Channels to walls.
Product code : 53BEBC
For use on plasterboard prior to paint and wallpaper application. Improved whiteness and covering power.
Product code : 53BCSUN
GTEC Standard Board with an additional laminated vapour control layer.
Product code : 53AVI
Low profile head for connecting GTEC metal components beneath plasterboard.
Product code : 53BFWSD
Product code : 53BFWST
For bonding plasterboard to tiles or bonding flooring to plasterboard in some flooring systems.
Product code : 53BEDA
For use with the Siniat GTEC Aqua Board and GTEC Weather Defence.
Product code : 53BFSHT
Product code : 53BFSSD
Product code : 53BFSST
One board for all applications offering impact, fire, moisture and acoustic performance.
Product code : 53AU
Air drying powder joint finishing compound for professionals.
Product code : 53BCJC
High quality professional joint filler for bedding and filling.
Product code : 53BCJF
Combined air drying and setting compound.
Product code : 53BCMP
An A1 fire rated calcium silicate building board, suitable for use in a range of internal and semi-exposed applications.
Product code : 53AOS
Siniat Smartmix is an air-drying, ready-mixed joint compound for all stages of plasterboard jointing.
Product code : 53BCRM
A versatile tile backing board.
Product code : 53AIS
Accessing our website tells us you are happy to receive all our cookies. However you can change your cookie settings at any time. Find out more.