Patchroc GP is designed for horizontal use and is particularly useful when interruption of traffic must be minimised. It may be applied up to a maximum thickness of 100mm. Thicker sections can be built up in layers or by use of Patchroc 250. Material should not be applied at less than 12mm thickness. Individual bay sizes should not exceed 4m2. Consult the local Fosroc office for further information.
Patchroc GP is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent repair mortar. It is based on Portland cements, graded aggregates, and chemical additives providing a mortar with good handling characteristics while minimising water demand. The low water requirement ensures good strength gain and long-term durability.
The product is alkaline in nature and will protect embedded steel reinforcement.
Product code : 84FPAT
Nationwide Delivery
