DRYWALL METAL SECTIONS

Filter by:

 
Filter By:

Filter by:

 
Showing 1 - 59 of 59
  • 1
British Gypsum Deep Flange Channel

British Gypsum Deep Flange Channel

For securing wall studs at floor and ceiling junctions.

Product code : 53KD

Quantity
(Length)
British Gypsum Extra Deep Flange Channel

British Gypsum Extra Deep Flange Channel

Securing wall studs at floor and ceiling junctions for partitions up to 8000mm high.

Product code : 53KE

Quantity
(Length)
British Gypsum Folded Edge Channel

British Gypsum Folded Edge Channel

For securing wall studs at floor and ceiling junctions.

Product code : 53KCA

Quantity
(Length)
British Gypsum Gfs1 Fixing Strap

British Gypsum GFS1 Fixing Strap

Suitable for cross-bracing on twin frame wall systems and fixing of medium to heavyweight fittings.

Product code : 53KJG

Quantity
(Length)
British Gypsum Gypframe Acoustuds

British Gypsum Gypframe AcouStuds

Unique shaped studs used for increased acoustic performance in wall framing.

Product code : 53KA

Quantity
(Length)
British Gypsum Gypframe Angles Fea1 Steel Angle Ga2 Steel Angle

British Gypsum Gypframe Angle

Widely used in framed construction to provide support, protection, fixing and additional strength to framing.

Product code : 53KH

Quantity
(Length)
British Gypsum Gypframe C Stud 70 S 60

British Gypsum Gypframe C Stud

Vertical supports for Gypframe wall framing systems.

Product code : 53KB

Quantity
(Length)
British Gypsum Gypframe I Stud

British Gypsum Gypframe I Studs

Vertical support designed for stronger partition systems, allowing for increased partition height.

Product code : 53KI

Quantity
(Length)
British Gypsum Rb1 Resilient Bar

British Gypsum RB1 Resilient Bar

Acoustically engineered channel to separate board fixing from the primary frame.

Product code : 53KPR

Quantity
(Length)
Hadley Angle 25X25

Hadley Angle

Used as part of a Hadley System to create nonloadbearing internal partitions.

Product code : 53MA

Quantity
Hadley C Stud

Hadley C Stud

Cold-rolled steel studs used as part of a Hadley System to create non-loadbearing internal partitions.

Product code : 53MCS

Quantity
Hadley Flat Strap

Hadley Flat Strap

Used to strengthen Horizontal joints and to allow for a secure fixing point within a deflection head build up.

Product code : 53MFS

Quantity
Hadley I Stud

Hadley I Stud

Used as part of a Hadley System to create non-loadbearing internal partitions.

Product code : 53MFI

Quantity
Hadley Liner Stud

Hadley Liner Stud

Used as the vertical studs on our HadleySHIELD system.

Product code : 53MLS

Quantity
Hadley Liner Track

Hadley Liner Track

Secured to the head and base of HadleySHIELD system to receive ends of Hadley Liner Studs.

Product code : 53MLT

Quantity
Hadley Resilient Bar

Hadley Resilient Bar

Used alongside our HadleyHUSH System helps improve acoustic performance.

Product code : 53MRB

Quantity
Hadley Standard Track

Hadley Standard Track

Used mainly at the head and base junctions of Hadley system to create non-loadbearing internal partitions.

Product code : 53MTUC

Quantity
Hadley Deep Track

Hadley Deep Track

Used mainly at the head and base junctions of Hadley System to create non-loadbearing internal partitions.

Product code : 53MUC5

Quantity
Hadley Extra Deeo Track

Hadley Extra Deep Track

Used mainly at the head and base junctions of Hadley Systems to create non-loadbearing internal partitions.

Product code : 53MUC7

Quantity
Knauf Acoustic C Stud

Knauf Acoustic C Stud

Galvanised lightweight steel section for use in non-load bearing Knauf partition systems.

Product code : 53WMCA

Quantity
(Length)
Knauf Angle Section

Knauf Angle Sections

Knauf Angle Sections are galvanised mid steel angles for use with partitions, column and beam encasements and suspended ceilings.

Product code : 53WNAS

Quantity
(Length)
Knauf C Channel

Knauf C Channel

Galvanised lightweight steel section for use in Knauf wall lining systems and Knauf C-Form Ceiling Systems.

Product code : 53WWCC

Quantity
(Length)
Knauf C Channel Connector

Knauf C Channel Connector

Metal connector, used to join two sections of Knauf C Channel in Knauf C-Form Ceiling_Systems

Product code : 53WWCCC

Quantity
(Pack)
Knauf C Stud

Knauf C Stud

Knauf C Studs are a galvanised lightweight steel section for use in non-load bearing Knauf partition systems.

Product code : 53WMCS

Quantity
(Length)
Knauf CD Channel Intersection Connector

Knauf Channel Intersection Connector

The Knauf Channel Intersection Connector locates primary and secondary channels.

Product code : 53WWCIC

Quantity
(Pack)
Knauf Core Board Channel

Knauf Core Board Channel

Used to provide fixing for horizontal Knauf Core Board joins to ensure fire protection of the Knauf Shaft Wall system

Product code : 53W

Quantity
(Length)
Knauf CT Stud

Knauf CT Stud

The Knauf CT Stud is a unique galvanised steel section used in the Knauf Shaftwall System.

Product code : 53WL

Quantity
(Length)
Knauf Deep Flange U Channel 50Mm Flange

Knauf Deep Flange U Channels

A galvanised steel section for use as an optional head track where increased deflection is expected.

Product code : 53WEUD

Quantity
(Length)
Knauf Deflection Head Fire Seal

Knauf Deflection Head Fire Seal

Used at the deflection head detail of drywall partition systems to provide an effective fire and acoustic barrier.

Product code : 53WODHFS

Quantity
(Pack)
Knauf Drywall Movement Control Joint

Knauf Drywall Movement Control Joint

An aluminium section used to bridge gaps left for expansion and contraction in drywall partitions.

Product code : 53WAMC

Quantity
(Pack)
Knauf Fixing Channel

Knauf Fixing Channel

Offers additional rigidity over the flat fixing plate, for use with partitions and wall linings.

Product code : 53WNFC

Quantity
(Length)
Knauf Fixing Clip

Knauf Fixing Clip

Knauf Fixing Clips offer a secure connection of channel sections.

Product code : 53WNFX

Quantity
(Box)
Knauf Flat Fixing Plate

Knauf Flat Fixing Plate

Used as part of a deflection head as well as to improve rigidity or for the horizontal board joints where required.

Product code : 53WNFF

Quantity
(Length)
Knauf I Stud

Knauf I Stud

Galvanised lightweight steel sections for use in non-load-bearing Knauf partition and wall lining systems.

Product code : 53WG

Quantity
(Length)
Knauf J Channel

Knauf J Channel

Used as head and floor track and perimeter framing section of the Knauf Shaft wall system.

Product code : 53WJ

Quantity
(Length)
Knauf Resilient Bar

Knauf Resilient Bar

A resilient metal section which is fixed to floors and partitions to reduce direct sound transmission.

Product code : 53WNRB

Quantity
(Length)
Knauf Staggered Stud Clip

Knauf Staggered Stud Clip

Knauf Staggered Stud Clips are used to locate Knauf I studs in the Knauf Silent Spacesaver Partition Systems.

Product code : 53WGS

Quantity
Knauf U Channel

Knauf U Channel

A galvanised steel section for use as the standard head and floor track, suitable for use in Knauf partitions and wall linings.

Product code : 53WEUC

Quantity
(Length)
Knauf Universal Bracket

Knauf Universal Bracket

Locates Knauf C Channel to the background support, for use in Knauf Wall Liner and C Form ceiling systems.

Product code : 53WWUB

Quantity
(Pack)
Siniat Acoustic Stud Set X3

Siniat Acoustic Studs

A unique shaped C Stud which can give increased acoustic performance over standard C Studs with the same board linings.

Product code : 53CDAS

Quantity
(Length)
Siniat Acoustic V Brace

Siniat Acoustic V Brace

Spring steel acoustic brace.

Product code : 53CJVB

Quantity
(Box)
Siniat Acoustic V Brace 90

Siniat Acoustic V Brace 90 degree

Spring steel acoustic brace.

Product code : 53CJVB90

Quantity
(Box)
Siniat C Studs

Siniat C Studs

C shaped metal section used with Siniat U Track to provide framework for wall linings and partitions.

Product code : 53CACS

Quantity
(Length)
Siniat CH Stud

Siniat CH Studs

CH Stud is a non-loadbearing section utilised as part of Siniat Shaftwall Systems.

Product code : 53CECH

Quantity
(Length)
Siniat E Studs

Siniat E Studs

Steel sections used for starter studs, intersections, door openings and end studs as part of the Siniat Shaftwall Systems.

Product code : 53CFES

Quantity
(Length)
Siniat Fixing Channel

Siniat Fixing Channel

Fixing Channel is a galvanised metal channel used in linings and partitions.

Product code : 53CHM

Quantity
(Length)
Siniat Flat Strap

Siniat Flat Strap

GTEC Strap is a galvanised metal used in linings and partitions.

Product code : 53CJFS

Quantity
(Length)
Siniat Flex Track Deep Flange

Siniat Flex Track Deep Flange

Flex track is designed to allow easy construction of curved partitions.

Product code : 53CGDF

Quantity
(Length)
Siniat Heavy Gauge Primary Channel

Siniat Heavy Gauge Primary Channel

Heavy Gauge Primary Channel is a steel channel used to form heavy duty suspended ceiling grids.

Product code : 53CGUDT052Y

Quantity
(Length)
Siniat I Studs

Siniat I Studs

I Stud is an I shaped section used for vertical frame elements within a Siniat system.

Product code : 53CCIS

Quantity
(Length)
Siniat Insulation Hold Strip

Siniat Insulation Hold Strip

A galvanised metal strip used in a variety of systems to help with the installation of mineral wool insulation quilt.

Product code : 53CJIN

Quantity
(Length)
Siniat J Track

Siniat J Track

J Track is a J shaped steel track utilised as part of the Siniat Shaftwall System.

Product code : 53CGJT

Quantity
(Length)
Siniat Metal Angle 90

Siniat Metal Angle 90 degree

Galvanised versatile metal section used in a number of systems.

Product code : 53CJMF

Quantity
(Length)
Siniat Resiliant Acoustic Stud

Siniat Resilient Acoustic Studs

An innovative acoustic stud aimed at helping achieve acoustic performances on site.

Product code : 53CDRA

Quantity
(Length)
Siniat Resilient Bar Deep

Siniat Resilient Bar Deep

Resilient Bar is a galvanised acoustic isolation bar used in multiple systems.

Product code : 53CHRBD

Quantity
(Length)
Siniat Resilient Tape

Siniat Resilient Tape

Resilient Tape Self-adhesive acoustic isolation tape.

Product code : 53CJRA

Quantity
(Roll)
Siniat U Track

Siniat U Track

U Track is a U shaped section used with Siniat C Studs to provide framework for wall linings and partitions.

Product code : 53CGUT

Quantity
(Length)
Siniat U Track Extra Deep

Siniat U Track Deep Flange

U Track Deep Flange is a B gauge U shaped section used for partitions with heights exceeding 4m.

Product code : 53CGUDT

Quantity
(Length)
Siniat U Track Extra Deep

Siniat U Track Extra Deep Flange

U Track Extra Deep Flange is a W gauge U shaped section used for partitions with heights exceeding 4.2m.

Product code : 53CGUXT

Quantity
(Length)

Showing 1 - 59 of 59
  • 1

We offer a number of metal stud and track systems that provide a sturdy framework for fixing plasterboard. Whether you choose to use drywall metal sections from leading manufacturers such as KnaufBritish Gypsum and Siniat.

For specified work, our leading drywall manufacturers offer warranties when their full product systems are used, and their installation instructions are followed. The warranties offered by manufacturers are designed to give you and your customers total confidence that the systems you have chosen will meet the most rigorous of building requirements.

Longline drywall metal profiles are our own brand value offering, providing a cost-effective solution without compromising on quality. The Longline range is perfect for non-specified work, where the choice of material is in your own hands.

For more information about the suppliers’ warranties or our own brand, Longline metal, Please contact your local branch. You can find your local branch by using the branch locator.