BG Thistle Plaster Bonding Agents (53JU)

British Gypsum (BG)

Building

Interiors

Nevill Long

Product Description:

High performance plaster bonding agent and suction control primer to work on different backgrounds.

Thistle Bond-it
High performance plaster bonding agent - specially formulated for use on smooth backgrounds.
- For use on smooth backgrounds e.g. concrete with Thistle Bonding Coat, or for re-skimming.
- No dilution - so no scope for errors, no time spent mixing, no confusion on site.
- Always used in one coat only - so no decisions to take about background porosity etc.
- Contains fine aggregates for better mechanical, as well as chemical adhesion.
- Green in colour - so it's easy to see where it's been applied.
- Plastered when dry - so no difficult timing to get right.
- The only product recommended for use with Thistle Bonding Coat plaster.
- 10 litre container
Thistle GypPrime
Suction control primer for the pre-treatment of very high suction backgrounds prior to plastering
- Lengthens the working time of plasters on very high suction backgrounds by helping them retain water, and minimises potential for adhesion failure caused by rapid dry-out
- Yellow in colour - easy to avoid missing any areas
- Can be diluted - normally 1 part to 5 parts water provides adequate suction control, or can be used neat if necessary to control extremely severe suction
- One tub covers up to 600 sq.m (diluted 1:5) or 100 sq.m undiluted
- Easily applied by suitable roller, brush or spray
- Large container allows application directly from the tub
- Helps to consolidate dusty backgrounds

Encon Product Code	Product Description	Stocking Unit
53JUGYP	BG THISTLE GYPPRIME 11L	TUB
53JUTB	BG THISTLE BOND-IT 10LTR	TUB